Edit Case Details

Edit Title and Description

Title

Description

Engineer M works as a building manager for a public entity and is aware that a new piece of equipment being installed in the facility has a requirement for a design release (a document filed with the state building commissioner’s office). Engineer M has no formal role in approving contracts or accepting equipment for the employing public entity . The design release requirements include provisions for a signature from a licensed professional on the application.

Firm A designs and assembles the equipment, and Engineer M has monitored the progress of the equipment design and is familiar with who completed the various portions of the work. The design includes electrical and mechanical systems and also requires structural analysis; compliance with applicable provisions of the state building code is required for this equipment. As the time for final approval of the project to install the equipment approaches, Engineer M is shown a copy of a design release Firm A obtained from the state for the equipment.

Engineer B is listed as the design professional of record on the state release. A review of the website for Engineer B’s firm shows their specialty is electrical work, and Engineer M was unaware of Engineer B’s involvement with any stage of the project until the design release was prepared.

The issue of an engineer’s role in a project and acceptance of responsible charge is a subject that the NSPE Board of Ethical Review (BER) has visited numerous times over the last five decades. As technology evolves and new engineering fields progress, our Code of Ethics also evolves, as does the definition of responsible charge. 1

The BER has visited the issue of sealing plans and responsible charge as far back as 1964. In BER Case 64-7, the policy of a state health department office was to use the District Sanitary Engineer’s seal and name on all plans and engineering documents when the assistant sanitary engineer performed the actual engineering review. The policy went so far as to specify, “that when the district sanitary engineer is absent the assistant sanitary engineer shall review the plans and applications for permits and, after approval, sign the name of the district sanitary engineer, even though the district sanitary engineer has not seen or reviewed the documents.”

The Board found that it was not unusual for an engineer to sign his name and title to engineering documents that were prepared or reviewed by his subordinates if he is familiar with the work and checked the work involved. Said the Board, “We see no objection, however, in the interests of clarity and continuity of authority, for the approval to indicate by stamp or printing the name of the district sanitary engineer, provided his name is followed by the name and signature of the assistant sanitary engineer. This will indicate that the approval is under the general authority of the district sanitary engineer and that the assistant sanitary engineer is acting within the scope of a delegation of authority to pass professional judgment on his own responsibility.”

In Case 64-7, the BER further made the distinction that, “the facts are that the assistant sanitary engineer on occasion reviews the engineering documents on his own responsibility and without the supervision or verification of the district sanitary engineer. In that case it is obvious that the assistant sanitary engineer takes sole responsibility for the decision to approve the plans or authorize the issuance of a permit. On that basis he alone should sign the engineering documents.”

The BER also evaluated responsible charge in Case 19-11. In this instance, Engineer A signed and sealed plans provided by the manufacturer with changes to the panel as well as an interface, designed by Engineer A, connecting it to existing speakers and alarm triggers. The Board concluded, “The facts are as follows: Engineer A did not have ‘responsible charge’ (direct control or personal supervision) over the work of [alarm manufacturer], an independent contractor; was not involved in the initial design of [alarm manufacturers], manufactured alarm and public address system; and did not have any authority or control over any changes made by [alarm manufacturer], to its drawings.”

The Board further added, “A far better course of action would be for Engineer A to seal only the interface drawings for the client. Also, if necessary, Engineer A should work with [alarm manufacturer], to have [alarm manufacturer], have another professional engineer sign and seal its work so that the work had been completed in a proper professional manner, consistent with State X laws and regulations.”

Upon reading the facts of the present case, the equipment design is multidisciplinary and arguably complex, and the first impression (or prima facie evidence) implies that some wrongdoing in the form of rubberstamping has occurred. But Engineer M’s concern about rubberstamping reflects only a limited internet search and the firm’s website. It is acknowledged that equipment manufacturers don’t always employ engineers who are licensed in all 50 states, and some firms partner with engineers who have familiarized themselves sufficiently and worked on the equipment to claim responsible charge for the work. Simply because Engineer M was not personally working with this particular engineer (Engineer B) on this specific piece of equipment does not mean that Engineer B is not sufficiently familiar with the particular piece of equipment to be deemed in responsible charge. On the other hand, Engineer M has monitored the progress of the equipment design and she is familiar with who completed the various portions of the work. So, at a minimum, reasonable questions about design responsibility remain unanswered.

1 One current definition of responsible charge, NSPE Position Statement No. 10-1778 (revised September 2019), states that “the professional engineer in responsible charge is actively engaged in the engineering process, from conception to completion. Engineering decisions must be personally made by the professional engineer or by others over which the PE provides supervisory direction and control authority. Reviewing drawings or documents after preparation without involvement in the design and development process does not satisfy the definition of responsible charge.”

Engineers shall undertake assignments only when qualified by education or experience in the specific technical fields involved.

Engineers shall not affix their signatures to any plans or documents dealing with subject matter in which they lack competence, nor to any plan or document not prepared under their direction and control.

Engineers may accept assignments and assume responsibility for coordination of an entire project and sign and seal the engineering documents for the entire project, provided that each technical segment is signed and sealed only by the qualified engineers who prepared the segment.

Cancel

Case Information

ID: 141

Type: case_study

Created: 2025-04-05 18:24

World: Engineering

Source: https://www.nspe.org/career-resources/ethics/equipment-design-certification-plan-stamping